Timing belt Movendis P-655-D/S5M-180

MOVENDIS P-655-D/S5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-655-D/S5M-180 and any equivalents.

The Movendis P-655-D/S5M-180 is a double-sided timing belt with a 655 mm length, part of the Curvilinear Double-Sided Timing Belts series. It is used where a synchronous drive needs teeth on both faces to turn two shafts in opposite directions from one belt. This page covers how to match it to the belt you are replacing.

Start with the marking on the back of the old belt. Read the part number exactly as printed and compare it with P-655-D/S5M-180. Confirm the profile and the 655 mm length before ordering. If the old belt is worn or the marking is gone, note the drive layout and the number of pulleys so the replacement can be checked against the same position.

A double-sided timing belt has teeth on both sides, so it can drive pulleys on either face. Check that the replacement has the same profile and the same 655 mm length as the belt removed. Inspect the pulleys for wear, and check the tensioner and idler for free rotation. If the drive uses more than one belt, replace the set together so the load stays even.

To request a quote, send the part number P-655-D/S5M-180 by WhatsApp or email. Include the quantity and, if you have it, a photo of the belt marking and the drive. The team replies promptly and can help confirm the right belt or suggest an equivalent.