Timing belt Movendis P-624-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-624-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-624-3M-450 and any equivalents.
The Movendis P-624-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile, a 624 mm length and a 3 mm pitch. When you need to replace a belt on a drive, match these three markings to the belt you are removing.
Start by reading the back of the old belt. The part number, profile and length are printed there, and they are the fastest way to confirm you have the right replacement. The P-624-3M-450 carries the HTD 3M profile and a 624 mm length, so your old belt should show the same profile and length before you order.
If the back of the belt is worn or unreadable, measure the old belt and check the drive pulleys. The profile must match the pulley groove, and the length must match the drive layout. The P-624-3M-450 is a curvilinear H-type timing belt with a 3 mm pitch, which is the pitch your pulleys need to be cut for.
Send us the part number from the old belt, or the profile and length you measured, and we will confirm the P-624-3M-450 or help you find the correct belt. We carry the Movendis line and serve maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America. Quotes are handled by WhatsApp or email.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 624mm
Frequently asked questions
- What do I need to match the P-624-3M-450 to my drive?
- Check the profile and length on the back of the old belt. This belt is HTD 3M with a 624 mm length and a 3 mm pitch. If the old markings match, the P-624-3M-450 is the correct profile and length.
- Can I use this belt if the old belt marking is unreadable?
- Yes. Measure the old belt and check the pulley grooves. The drive needs an HTD 3M profile and a 624 mm length. Send those measurements and we will confirm the P-624-3M-450.
- How do I request a quote for the P-624-3M-450?
- Send the part number P-624-3M-450 by WhatsApp or email. If you are replacing a belt with different markings, include the profile and length from the old belt so we can confirm the match.