V-belt Movendis P-5V2800
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-5V2800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-5V2800 and any equivalents.
The Movendis P-5V2800 is a narrow wedge V-belt with a 5V profile and a length of 7112 mm. When you need to match a belt being replaced, start with the marking on the old belt and confirm profile and length against this page.
To match this belt to the one being replaced, read the marking on the back of the old belt. The profile and length are the key identifiers: this belt is a 5V profile and 7112 mm long. If the old marking matches, the P-5V2800 is the correct replacement. If the marking is worn or missing, measure the top width and the outside length to confirm the 5V profile and 7112 mm length before ordering.
A narrow wedge V-belt like this one is used in industrial drives where a compact cross-section is needed. When replacing, inspect the sheaves for wear, alignment, and any signs of damage. If multiple belts run in a set, replace all belts at the same time to keep loads evenly distributed. Keep the old belt for comparison or note its marking before discarding it.
We carry the Movendis P-5V2800 and can help you confirm it is the right belt for your drive. Send the part number, the old belt marking, or a photo of the belt and sheave to our team by WhatsApp or email. We reply promptly and can suggest an equivalent if needed.
Dimensions
- Section
- 5V
- Length
- 7112mm
Frequently asked questions
- How do I confirm the Movendis P-5V2800 matches my old belt?
- Check the marking on the back of your old belt. It should show a 5V profile and a 7112 mm length. If it does, the P-5V2800 is the correct replacement. If the marking is not clear, measure the top width and outside length to verify.
- What should I send to get a quote for this belt?
- Send the part number P-5V2800, or the marking from your old belt, along with the quantity you need. You can contact us by WhatsApp or email. If you have a photo of the old belt and the sheave, that also helps us confirm the match.
- Should I replace all belts in a set at once?
- Yes. When multiple belts run together on the same drive, replace them as a set. Mixing new and worn belts can cause uneven tension and premature failure. The P-5V2800 should be matched with belts of the same profile and length.