Timing belt Movendis P-582-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-582-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-582-3M-450 and any equivalents.
The Movendis P-582-3M-450 is a timing belt in the Curvilinear H-Type series with an HTD 3M profile and a 582 mm length. The 3 mm pitch identifies the tooth spacing for this synchronous drive belt.
When you read the marking on the back of the old belt, confirm the profile and length match what you need. The P-582-3M-450 marking identifies an HTD 3M profile, a 582 mm length, and a 3 mm pitch. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to confirm the profile before ordering.
This belt is used in synchronous drives where tooth engagement maintains timing between the pulley and the belt. Inspect the pulleys for worn teeth, proper alignment, and correct tension. Replace the belt if you see cracked teeth, exposed cords, or glazing on the back.
To request a quote, send the part number P-582-3M-450 by WhatsApp or email. If you are unsure about the profile or length, include a photo of the old belt marking and the pulley dimensions. We carry the Movendis line and can help confirm the right belt for your drive.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 582mm
Frequently asked questions
- What does the marking on the back of the belt tell me?
- The marking P-582-3M-450 indicates an HTD 3M profile, a 582 mm length, and a 3 mm pitch. Use these values to match the belt to your drive.
- How do I confirm the profile and length?
- Check the old belt marking for HTD 3M and 582 mm. If the marking is worn, measure the belt length and verify the tooth profile against the pulley.
- What should I send for a quote?
- Send the part number P-582-3M-450 by WhatsApp or email. If you need help confirming the belt, include a photo of the old belt marking and the pulley dimensions.