Timing belt Movendis P-564-3M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-564-3M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-564-3M-480 and any equivalents.
The Movendis P-564-3M-480 is a curvilinear H-type timing belt with an HTD 3M profile, a 564 mm length, and a 3 mm pitch. This page helps you match that exact belt to the one being replaced on your drive.
Start by reading the marking on the back of the old belt. You are looking for the profile and the length together: HTD 3M and 564 mm. If the belt is worn or the print is gone, measure the pitch and the length, then compare those figures to the P-564-3M-480. A belt with a different profile or length will not seat correctly in the pulleys.
Once the profile and length match, inspect the drive before the new belt goes on. Check the pulleys for worn grooves, the flanges for bends, and the shafts for play. Misalignment or damaged pulleys will shorten the life of any timing belt, including this one. Confirm that the belt path is clean and that the tensioner, if fitted, moves freely.
If you are unsure whether the P-564-3M-480 is the right replacement, send the old belt's marking, the pulley tooth count, and the center distance to our team by WhatsApp or email. We carry the Movendis line and will confirm the match or point you to the correct belt.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 564mm
Frequently asked questions
- How do I confirm the P-564-3M-480 is the belt I need?
- Compare the profile and length on the back of the old belt to HTD 3M and 564 mm. If the marking is unreadable, measure the pitch and length and send those figures to us.
- Can I replace just one belt on a multi-belt drive?
- Timing belts on the same drive should be replaced as a set when they have run together. Mixing a new belt with worn ones can change the tension and timing across the drive.
- What information should I send for a quote?
- Send the part number P-564-3M-480, or the old belt's marking, along with the pulley tooth count and center distance. Our team replies by WhatsApp or email.