Timing belt Movendis P-560-T5-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Metric Tooth Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-560-T5-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-560-T5-480 and any equivalents.
This Movendis P-560-T5-480 is a metric tooth timing belt with a T5 profile and a 560 mm length on a 5 mm pitch. It is used in drives where timing and position matter more than raw power, such as light conveyors, packaging equipment, small pumps and compact motion systems.
To confirm fit, check the old belt's back marking for the profile and length. The T5 profile and 560 mm length must match the pulleys and the drive path. If the marking is worn, measure the pitch and the overall length and compare them to the data here.
Also inspect the pulleys for worn teeth, the flanges for damage and the tensioner for free movement. A belt that is the right size but runs on worn pulleys will not last. Replace the belt when you see cracked teeth, exposed cords or glazing on the teeth.
We carry the Movendis P-560-T5-480 and can help you confirm the right belt or suggest an equivalent. Send the part number, the belt marking and a photo of the drive by WhatsApp or email, and the team will reply promptly with a quote.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 560mm
Frequently asked questions
- How do I confirm the Movendis P-560-T5-480 is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length to the T5 profile and 560 mm length of this belt. If the marking is not clear, measure the pitch and the length and check them against the data on this page.
- What should I check on the drive before installing a new timing belt?
- Inspect the pulleys for worn or damaged teeth, check the flanges for bends or wear and make sure the tensioner moves freely. Worn components can shorten the life of a new belt even if the size is correct.
- What information do you need to quote the Movendis P-560-T5-480?
- Send the part number P-560-T5-480, the belt marking from the old belt and a photo of the drive if possible. You can send this by WhatsApp or email, and the team will reply promptly with a quote.