Timing belt Movendis P-558-D/S4.5M-180

MOVENDIS P-558-D/S4.5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-558-D/S4.5M-180 and any equivalents.

This Movendis curvilinear double-sided timing belt carries the part number P-558-D/S4.5M-180 and a length of 558 mm. Double-sided timing belts drive from both faces, so they suit drives where two shafts must turn in opposite directions or where a reversing motion is built into the layout. Confirm the belt on the machine before ordering.

A double-sided timing belt is used where the drive has pulleys on both sides of the belt, not just the toothed face. On equipment with reversing shafts or two driven points, the back of the belt also carries teeth. Read the marking on the back of the old belt and compare it with the part number above. Check the profile and the 558 mm length against the belt you are replacing.

Inspect the drive before you fit a new belt. Look at both pulley faces for wear, check that the teeth mesh correctly on each side, and confirm the belt runs straight without rubbing. If the old belt has damaged teeth, a stretched section or exposed cord, note that as well. Send the part number and any photos of the marking to our team by WhatsApp or email and we will confirm the belt or suggest an equivalent.

For a quote, send the part number P-558-D/S4.5M-180 and the quantity you need. If you have the old belt, include the marking on the back and the number of teeth you count. Our team replies promptly and can help confirm the right belt for your drive.