Timing belt Movendis P-552-8M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-552-8M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-552-8M-450 and any equivalents.
The Movendis P-552-8M-450 is a curvilinear H-type timing belt with an HTD 8M profile, a 552 mm length and an 8 mm pitch. It is the belt to reach for when the drive you are servicing calls for that profile and length. Matching it to the belt being replaced starts with reading the old belt.
Before you order, pull the worn belt and read the marking printed on the back. Confirm three things against this listing: the profile is HTD 8M, the length is 552 mm and the pitch is 8 mm. The part number P-552-8M-450 carries that same size information, so a clean read of the old belt is usually all it takes to confirm the match.
Inspect the drive while the belt is off. Check the pulleys for worn teeth, debris in the grooves and any misalignment, and check the tensioner for free movement. A new belt fitted to a worn or misaligned drive will not run correctly, so correcting those points first protects the replacement.
Send the part number P-552-8M-450 by WhatsApp or email and our team will confirm the belt or suggest an equivalent. If the marking on the old belt is worn or unreadable, send the profile, length and pitch you measured, along with the equipment details, and we will help you sort it out.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 552mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. If it shows an HTD 8M profile, a 552 mm length and an 8 mm pitch, this belt matches that size. Send the part number P-552-8M-450 or the old belt marking to our team and we will confirm it.
- What should I include when requesting a quote?
- Send the part number P-552-8M-450, or the profile, length and pitch from the old belt, plus the equipment it runs on. That is enough for our team to confirm the belt or suggest an equivalent.
- Should I replace anything else at the same time?
- Inspect the pulleys, tensioner and drive alignment while the belt is off. Worn teeth, debris in the grooves or misalignment will affect the new belt, so address those points before fitting the replacement.