Timing belt Movendis P-550-5M-370

MOVENDIS P-550-5M-370 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-550-5M-370 and any equivalents.

The Movendis P-550-5M-370 is a timing belt in the Curvilinear H-Type series, built to the HTD 5M profile with a 550 mm length and 5 mm pitch. If you are replacing a worn or broken belt, this page is written to help you confirm the number on the old part before you order.

Start with the belt you are removing. Read the marking printed on the back of it and compare each element against this listing: the part number P-550-5M-370, the HTD 5M profile, the 550 mm length and the 5 mm pitch. A belt that matches on all four points is the correct replacement for that position in the drive.

Where the old marking is worn, measure instead. A 550 mm length and a 5 mm pitch define the belt's fit on the pulleys, and the HTD 5M profile identifies the tooth form. Check the pulleys at the same time for worn teeth, and check the drive for alignment and tension before the new belt goes on. On drives running more than one belt, replace the set together so the load stays even.

When you send your quote request by WhatsApp or email, include the part number P-550-5M-370 and the quantity you need. If the marking on your old belt is unreadable, send the profile, the length and the pitch you measured, or a photo of the belt and the pulley, and the team will confirm the right belt or suggest an equivalent.