Timing belt Movendis P-531-3M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-531-3M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-531-3M-480 and any equivalents.
The Movendis P-531-3M-480 is a curvilinear H-type timing belt built to the HTD 3M profile. Its 531 mm length and 3 mm pitch define where it fits, so the marking on the old belt is the fastest way to confirm a match.
The profile sets the tooth shape and the pitch sets the spacing between tooth centers. On this belt the profile is HTD 3M and the pitch is 3 mm, which tells you it is a small-pitch synchronous belt. The length is 531 mm, measured around the belt. Read those three values together before you compare a replacement to the belt you are removing.
When you request a quote, send the part number P-531-3M-480 or the marking from the back of the belt: profile, pitch and length. If the old belt is worn or the marking is gone, measure the length and count the teeth so we can confirm the right belt. We carry the Movendis line and reply promptly by WhatsApp or email.
Check the drive before ordering. Look at the pulleys for worn teeth or grooves, set the belt tension to the drive manufacturer's specification, and align the pulleys so the belt runs true. A belt that fails early often points to a drive problem rather than the belt itself.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 531mm
Frequently asked questions
- What do the profile and length on the P-531-3M-480 tell me?
- They tell you the tooth shape and the length. This belt uses the HTD 3M profile with a 3 mm pitch and a 531 mm length. Match all three to the belt you are replacing.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile, pitch and length. If the marking is not readable, measure the length and count the teeth, then send those details with your quote request.
- What should I include when I request a quote?
- Send the part number P-531-3M-480, or the profile, pitch and length from the old belt. Photos of the belt marking and the drive help us confirm the match. We reply promptly by WhatsApp or email.