Timing belt Movendis P-528-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-528-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-528-3M-450 and any equivalents.
The Movendis P-528-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile, a 528 mm length and a 3 mm pitch. If you are replacing a belt on a drive, this page gives you the identifiers to match against the belt in your hand.
Start with the marking on the back of the old belt. A curvilinear H-type timing belt carries its profile and length on the backing, so read the profile and the length before you order. This belt is HTD 3M with a 528 mm length and a 3 mm pitch. The part number P-528-3M-450 is what we quote against, so send that number if the old marking is worn or unreadable.
Profile and length are the two values that must line up. HTD 3M is a curvilinear profile, and the 3 mm pitch fixes the spacing of the teeth along the belt. The 528 mm length is the figure to compare with your old belt. If your drive runs more than one belt, replace the set together so the drive stays even.
Before you order, look over the pulleys and the rest of the drive. Check the pulley teeth for wear and the flanges for damage, and confirm the belt runs straight without rubbing. Send the part number P-528-3M-450 by WhatsApp or email and our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 528mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing and compare the profile and length. This belt is HTD 3M with a 528 mm length and a 3 mm pitch. If the marking is gone, send photos of the belt and the drive.
- What do I send to get a quote?
- Send the part number P-528-3M-450 by WhatsApp or email. If you have the old belt, include the profile and length from its backing, and any photos of the drive that help us confirm the match.
- Should I replace more than one belt at a time?
- If the drive uses more than one belt, replace them as a set so the load stays even across the drive. Check the pulleys and flanges at the same time.