Timing belt Movendis P-496-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-496-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-496-8M-480 and any equivalents.
This Movendis P-496-8M-480 is a curvilinear H-type timing belt with an HTD 8M profile, a 496 mm length and an 8 mm pitch. It is used on drives where a synchronous belt must mesh with matching 8M pulleys and hold a fixed length. To confirm the fit, compare the profile, length and pitch on the belt you are replacing with these values.
Timing belts of this type are common in industrial drives that need non-slip power transmission, such as machinery where the belt runs over toothed pulleys. The HTD 8M profile and 8 mm pitch identify the tooth form and spacing, while the 496 mm length sets the belt's circumference. If the drive uses a different profile or pitch, the belt will not seat correctly on the pulleys.
The most reliable way to confirm a replacement is to read the marking on the back of the old belt and match it to the part number. Check that the profile reads HTD 8M, the pitch is 8 mm and the length is 496 mm. Also inspect the pulleys for worn teeth or damage that could affect a new belt. Send the part number P-496-8M-480 by WhatsApp or email and our team will respond promptly to confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 496mm
Frequently asked questions
- How do I confirm that the Movendis P-496-8M-480 fits my drive?
- Match the profile, length and pitch on your existing belt to HTD 8M, 496 mm and 8 mm. If the marking on the back of the belt matches these values, it is the same size. You can also send a photo of the old belt marking for confirmation.
- What should I send to request a quote for this belt?
- Send the part number P-496-8M-480 by WhatsApp or email. If you are unsure about the part number, include the profile, length and pitch from the old belt, and our team will help confirm the correct belt.
- Can I replace just one belt in a multi-belt drive?
- On drives that use more than one belt, replacing all belts at the same time helps keep tension and wear even across the set. If you are replacing a single belt, check the condition of the others and confirm the part number matches.