Timing belt Movendis P-480-T5-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Metric Tooth Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-480-T5-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-480-T5-450 and any equivalents.
The Movendis P-480-T5-450 is a metric tooth timing belt with a T5 profile, a 480 mm length, and a 5 mm pitch. Before you fit it, inspect the drive and sheaves so the new belt runs true and lasts.
Check the sheaves for worn grooves, burrs, or debris that can damage the belt teeth. Confirm the shafts turn freely and that the sheave alignment is correct. A T5 profile belt seats in the grooves by its teeth, so any roughness or misalignment will show up quickly.
Measure the old belt and compare it with the P-480-T5-450. The profile is T5, the length is 480 mm, and the pitch is 5 mm. If the drive uses more than one belt, replace them as a set so the load stays even.
When you request a quote, send the part number P-480-T5-450 and a photo of the marking on the back of the old belt. We carry Movendis metric tooth timing belts and can help confirm this is the right belt for your drive.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 480mm
Frequently asked questions
- What are the key dimensions of the Movendis P-480-T5-450?
- It is a T5 profile timing belt with a 480 mm length and a 5 mm pitch.
- How do I confirm this belt fits my drive?
- Check the old belt marking and measure its length. The P-480-T5-450 is a T5 profile belt, 480 mm long, with a 5 mm pitch. Send us the part number and a photo of the old belt marking for confirmation.
- What should I inspect before installing a new timing belt?
- Inspect the sheaves for wear, burrs, or debris, and verify shaft rotation and alignment. Correct any issues before fitting the new belt.