Timing belt Movendis P-441-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-441-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-441-3M-450 and any equivalents.
The Movendis P-441-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile, a 441 mm length and a 3 mm pitch. The profile and length are the two numbers that matter most when you are replacing a belt or specifying a drive, so both are stated clearly here.
HTD 3M is a curvilinear tooth profile, which means the teeth are rounded rather than trapezoidal. That shape changes how the belt seats in the pulley grooves and how load is carried across the tooth. A 3 mm pitch tells you the distance from one tooth center to the next along the belt, so it must match the pulley pitch on the drive you are working on.
The 441 mm length is the belt's datum length. On a synchronous drive, the belt length and the pulley sizes together set the center distance and the tooth mesh. If the old belt is worn or the marking on the back has rubbed off, the part number P-441-3M-450 is the fastest way to confirm you are looking at the same profile and length.
This belt is part of the Movendis Curvilinear H-Type Timing Belts series. We carry Movendis belts and quote by part number. Send the part number, the quantity, and the drive or equipment it goes on by WhatsApp or email, and the team can confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 441mm
Frequently asked questions
- What do the profile and length on the P-441-3M-450 tell me?
- The profile is HTD 3M, a curvilinear tooth form, and the pitch is 3 mm. The length is 441 mm. The profile and pitch must match the pulley grooves, and the length must suit the drive center distance.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for the part number, or measure the profile and the length and compare them with the HTD 3M profile and 441 mm length listed here. If the marking is gone, send photos of the belt and the pulleys with your quote request.
- What should I send to get a quote?
- Send the part number P-441-3M-450, the quantity you need, and the equipment or drive it fits. If you are replacing more than one belt on the same drive, include that as well so the whole set can be quoted together.