Timing belt Movendis P-408-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-408-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-408-3M-450 and any equivalents.
The Movendis P-408-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile and a 408 mm length. It is built for drives that need a synchronous belt with a 3 mm pitch. This page covers how to match it to the belt you are replacing.
Start by reading the marking on the back of the belt you are removing. Compare the profile and the length to the HTD 3M profile and 408 mm length of the P-408-3M-450. A 3 mm pitch belt will not run correctly on a pulley cut for another pitch, so confirm the profile before you order.
Check the drive while the belt is off. Look at the pulleys for worn teeth, debris in the grooves and any misalignment between the two shafts. These conditions can shorten the life of a new timing belt. If the old belt failed early, correct the cause before installing the replacement.
When you send your quote request, include the part number P-408-3M-450, the quantity you need and a photo of the old belt marking if you have one. Our team can confirm the belt or suggest an equivalent. We carry Movendis belts and reply by WhatsApp or email.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 408mm
Frequently asked questions
- How do I confirm the P-408-3M-450 is the right belt?
- Match the profile and length on the back of your old belt to the HTD 3M profile and 408 mm length of this belt. If the marking is unreadable, send a photo and the drive details with your quote request.
- What should I include with my quote request?
- Send the part number P-408-3M-450, the quantity, and any marking from the old belt. If you are unsure of the profile, include a photo of the belt and the pulleys.
- Can I replace just one belt in a multi-belt drive?
- On drives that use more than one belt, replacing the full set at the same time helps keep the load even across the belts. Send the quantity you need with your quote request.