Timing belt Movendis P-4004-14M-430
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-4004-14M-430 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-4004-14M-430 and any equivalents.
The Movendis P-4004-14M-430 is a curvilinear H-type timing belt in the HTD 14M profile. It has a 4004 mm length and a 14 mm pitch. This synchronous belt is used in industrial drives where timing and positive engagement are required.
This belt suits driven equipment such as industrial machinery, process lines, and plant drives. The HTD 14M profile and 4004 mm length are the key dimensions to confirm against your existing belt or drive specification. Because it is a synchronous belt, it is not intended for friction-based drives.
To confirm fit, check the belt marking on the back of the old belt. The part number P-4004-14M-430 should match, or the profile and length should match. If the marking is worn, measure the length and identify the profile from the pulley grooves. Send the part number or these details for a quote.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 4004mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of your existing belt. The part number P-4004-14M-430, the HTD 14M profile, and the 4004 mm length should match your drive requirements. If the marking is not readable, identify the profile from the pulley grooves and measure the belt length.
- What information should I send for a quote?
- Send the part number P-4004-14M-430, along with the profile and length if you have them. If you are replacing a belt with a worn marking, provide the profile from the pulleys and the measured length. The team can then confirm the belt or suggest an equivalent.
- Is this belt suitable for my industrial application?
- This is a timing belt for synchronous drives. It is used where the belt must maintain timing between the pulleys. Check that the HTD 14M profile and 4004 mm length match your drive. If you are unsure, contact the team with your application details.