Timing belt Movendis P-400-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-400-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-400-8M-480 and any equivalents.
The Movendis P-400-8M-480 is a curvilinear H-type timing belt with an HTD 8M profile, a 400 mm length and an 8 mm pitch. Before fitting a new synchronous belt, inspect the drive so the replacement starts from a sound baseline.
Check the sheaves for worn grooves, corrosion, burrs and buildup in the tooth spaces, since any of these will shorten the life of a new belt. Confirm the two sheaves are aligned and that the shafts and bearings turn freely. Verify the belt tensioning arrangement works over its full range, and look for oil, heat or debris that should be corrected before the belt goes on.
Read the marking on the back of the old belt and compare it with the part number on this page. The profile and length identify the belt: HTD 8M profile, 400 mm length, 8 mm pitch. If the marking is worn away, measure the drive and send us what you find so we can help confirm the right belt.
Send the part number P-400-8M-480 by WhatsApp or email to request a quote. If you are replacing belts on a multi-belt drive, include the quantity and the drive details so we can review the whole order.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 400mm
Frequently asked questions
- What are the profile and length of the Movendis P-400-8M-480?
- It is an HTD 8M profile curvilinear H-type timing belt with a 400 mm length and an 8 mm pitch.
- What should I check before installing this belt?
- Inspect the sheaves for wear, corrosion, burrs and buildup in the tooth spaces, confirm alignment and free rotation, and check the tensioning arrangement and any oil, heat or debris around the drive.
- How do I request a quote for this belt?
- Send the part number P-400-8M-480 by WhatsApp or email. If you need more than one, include the quantity and your drive details.