V-belt Movendis P-3V1060
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3V
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-3V1060 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-3V1060 and any equivalents.
The Movendis P-3V1060 is a narrow wedge V-belt in the 3V profile with a length of 2703 mm. Narrow wedge belts are common on industrial drives where a compact cross-section carries the load, including pumps, fans, compressors and similar equipment. If you are replacing a worn belt, the profile and the length marked on the old belt are the two details to confirm first.
This belt is built to the 3V profile, so it seats in 3V sheaves. The length is 2703 mm. To confirm fit, read the marking on the back of the belt you are removing and compare the profile and length against these figures. A belt that has stretched or worn may no longer measure true, so the original marking is the better reference.
Check the sheave grooves while the belt is off. Worn or polished grooves will shorten the life of any replacement, and mismatched sheaves will do the same. On multi-belt drives, replace all belts in the set at once so the load stays evenly shared.
Send the part number P-3V1060 by WhatsApp or email and our team will confirm the belt or suggest an equivalent. Photos of the back marking and the sheave help us verify the profile and length quickly.
Dimensions
- Section
- 3V
- Length
- 2703mm
Frequently asked questions
- What does the 3V profile mean for fit?
- The 3V profile is the cross-section of the belt. It must match the groove of the sheave it runs in. If your drive uses 3V sheaves, this belt is the correct profile.
- How do I confirm the length before ordering?
- Read the marking on the back of the belt you are replacing. Compare the profile and the length against 3V and 2703 mm. If the old belt is badly worn, the original marking is more reliable than a measurement.
- What should I send for a quote?
- Send the part number P-3V1060 by WhatsApp or email. If you are unsure, include a photo of the belt marking and the sheave so we can confirm the profile and length.