Timing belt Movendis P-3960-T10-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Metric Tooth Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-3960-T10-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-3960-T10-450 and any equivalents.
The Movendis P-3960-T10-450 is a metric tooth timing belt with a T10 profile, a 3960 mm length and a 10 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs on clean, true surfaces.
Check the sheaves for worn grooves, burrs, corrosion or buildup that can damage the belt teeth. Confirm the sheave profile matches the T10 pitch and that the flanges are not bent or rubbing. Misalignment between sheaves will shorten belt life, so verify that the shafts are parallel and the belt tracks correctly.
Measure the old belt and compare it with the 3960 mm length and T10 profile. The part number P-3960-T10-450 identifies this Movendis belt, and the marking on the back of the belt should match before installation. If the drive shows uneven wear, correct the cause rather than fitting a new belt onto a faulty drive.
When you request a quote, send the part number P-3960-T10-450, the profile T10 and the length 3960 mm. If you are unsure, send a photo of the belt marking and the sheave details. We carry Movendis belts and can help confirm the right belt for your drive.
Dimensions
- Profile
- T10
- Pitch
- 10mm
- Length
- 3960mm
Frequently asked questions
- What does the marking on the back of the belt show?
- It should show the Movendis part number P-3960-T10-450, along with the T10 profile and the 3960 mm length. Always compare the marking with your old belt before fitting.
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, burrs or buildup, confirm the T10 profile matches the sheave grooves, and check alignment and flange condition. Correct any issues before fitting the new belt.
- What information do you need to quote this belt?
- Send the part number P-3960-T10-450. If you are unsure, include the profile T10, the length 3960 mm and a photo of the belt marking or sheave details.