Timing belt Movendis P-3850-D/14M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-3850-D/14M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-3850-D/14M-180 and any equivalents.
The Movendis P-3850-D/14M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a length of 3850 mm. This page is for maintenance and purchasing teams who need to match a belt already in service. The most reliable starting point is the code printed on the belt you are replacing.
Before you request a quote, read the marking on the back of the old belt. If it shows P-3850-D/14M-180, you have the same belt. The code identifies the series, the double-sided construction and the 3850 mm length. Confirm that the drive uses a double-sided timing belt and that the length matches what you measured or read from the original.
If the marking is worn or unreadable, check the machine documentation or the drive layout for a 3850 mm length and a double-sided timing belt. Do not substitute a single-sided belt where a double-sided belt is required. Send the full code, the belt width if it is marked, and a photo of the old belt to MR by WhatsApp or email. The team will confirm the Movendis P-3850-D/14M-180 or suggest the correct alternative.
Dimensions
- Length
- 3850mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the code on the back of the belt being replaced. If it reads P-3850-D/14M-180, it matches this Movendis double-sided timing belt. If the code is unreadable, measure the length and check that the drive uses a double-sided timing belt, then send the details to MR for confirmation.
- What should I send with my quote request?
- Send the full belt code, the width if it is marked on the belt, and a photo of the old belt. If the code is not visible, include the machine make and model and any drive documentation that shows the belt length. MR replies by WhatsApp or email.
- Can I use a single-sided belt instead?
- No. This is a double-sided timing belt. A single-sided belt will not match the drive requirements. Use the code P-3850-D/14M-180 to identify the correct double-sided belt.