Timing belt Movendis P-380-H-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Classical Imperial Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-380-H-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-380-H-480 and any equivalents.
The Movendis P-380-H-480 is a timing belt in the H profile with a length of 965.2 mm. It belongs to the Movendis Classical Imperial Timing Belts series. The profile and the length are the two figures to check first when you are matching this belt to a drive.
Profile and length do the matching work here. The H profile sets the tooth form and pitch of the belt, so it has to agree with the pulleys on the drive. The length of 965.2 mm sets the center distance the belt will run at. If either figure is different from what the drive calls for, the belt is not the right one, even if the part number looks close.
The cleanest way to confirm a replacement is to read the marking on the back of the old belt and compare it with P-380-H-480. Where the belt runs in a set, replace the set together so the drive stays in step. Inspect the pulleys at the same time for worn teeth, and check the belt for cracking, missing teeth or exposed cord before you order.
We carry the Movendis P-380-H-480. Send the part number by WhatsApp or email and the team will reply promptly to confirm it or suggest an equivalent. If the marking on the old belt is worn or unreadable, send the profile and the length you measured instead.
Dimensions
- Profile
- H
- Length
- 965.2mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The H profile defines the tooth form and pitch that must match the pulleys. The length of 965.2 mm defines the running length of the belt on the drive. Both figures need to match what the drive requires.
- How do I confirm the Movendis P-380-H-480 is the belt I need?
- Read the marking on the back of the old belt and compare it with P-380-H-480. If the marking is worn, measure the profile and the length and send those figures with your request.
- What should I send to get a quote?
- Send the part number P-380-H-480 by WhatsApp or email. If you are unsure of the number, send the belt marking or the profile and length instead, and the team will confirm the right belt.