Timing belt Movendis P-375-3M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-375-3M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-375-3M-480 and any equivalents.
The Movendis P-375-3M-480 is a curvilinear H-type timing belt with an HTD 3M profile. It measures 375 mm in length and has a 3 mm pitch. This page explains how to match it to the belt you are replacing.
To confirm this belt fits your drive, start with the marking on the back of the old belt. Look for the part number P-375-3M-480, or the profile and length. If the old belt is worn or the marking is gone, measure the pitch length and compare it to 375 mm. Also check that the profile is HTD 3M and the pitch is 3 mm.
Because timing belts wear gradually, it is good practice to inspect the pulleys and other drive components at the same time. Check for worn teeth, cracks, or glazing on the belt, and look for pulley wear or misalignment. If the drive uses more than one belt, replace them as a set to keep loads even.
When you request a quote, send the part number P-375-3M-480 and the quantity you need. If you are unsure about the exact replacement, include the old belt's marking, the pulley tooth count, and the center distance between pulleys. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 375mm
Frequently asked questions
- What if the marking on my old belt is unreadable?
- Measure the pitch length and compare it to 375 mm, and confirm the profile is HTD 3M with a 3 mm pitch. If you can, count the teeth on the pulleys and measure the center distance. Send those details with your quote request and we can help identify the correct belt.
- Should I replace both belts on a two-belt drive at the same time?
- Yes. Replacing belts in sets helps maintain even tension and load sharing. If one belt has failed, the other may be worn as well, so it is best to replace them together.
- What information do you need to quote the P-375-3M-480?
- Send the part number P-375-3M-480 and the quantity. If you want us to verify it against your application, also include the old belt's marking, the pulley tooth count, and the center distance between pulleys.