Timing belt Movendis P-364-S2M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear S-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-364-S2M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-364-S2M-450 and any equivalents.
This Movendis P-364-S2M-450 is a curvilinear S-Type timing belt with an STD profile and a 364 mm length. The profile and length are the two numbers to match first when you are selecting a replacement. We carry this belt and quote by part number.
The STD profile identifies the tooth form of this synchronous belt, and the 364 mm length fixes the pitch length on the drive. Confirm both against the marking on the back of the belt you are replacing, or against the drive drawing, before you order. If the old belt is worn or the marking is unreadable, send the part number you have and a photo of the belt.
Timing belts are often replaced as part of a drive inspection. Check the pulleys for worn teeth, the flanges for rub marks, and the tensioner for correct setting. A belt that has run hot or lost tension can show edge fraying or cracked teeth, which is a sign to look at the whole drive, not just the belt.
For a quote, send the part number P-364-S2M-450, the quantity, and any drive details you have. If you are not certain the profile or length is right, include the belt marking and the pulley information, and the team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Profile
- STD
- Length
- 364mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The STD profile describes the tooth form, and 364 mm is the length. Both need to match the drive before you replace the belt.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing, or the drive documentation, against the STD profile and 364 mm length. If you cannot read the old belt, send photos and the pulley details.
- What should I send to request a quote?
- Send the part number P-364-S2M-450 and the quantity you need. If you are unsure about the profile or length, include the belt marking and any pulley information so the team can help confirm it or suggest an equivalent.