Timing belt Movendis P-355-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-355-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-355-5M-480 and any equivalents.
The Movendis P-355-5M-480 is a curvilinear H-type timing belt with an HTD 5M profile, a 355 mm length and a 5 mm pitch. Before fitting it, inspect the drive and sheaves so the new belt runs true.
Check the sheaves for worn grooves, burrs, corrosion or debris, and confirm they are clean and aligned. Verify that the shaft turns freely and that bearings, tensioners and idlers are in serviceable condition. Correct any misalignment or runout before the belt is installed, because the old belt's wear pattern often points to a drive problem that a new belt alone will not fix.
Confirm the replacement matches the belt being removed: profile HTD 5M, length 355 mm, pitch 5 mm, part number P-355-5M-480. Read the marking on the back of the old belt and compare it with these values. If the marking is unreadable, measure the old belt and send the drive details with your quote request.
Send the part number P-355-5M-480, the belt marking and any drive or sheave information by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 355mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheaves for wear, damage or debris, check alignment and runout, and confirm shafts, bearings, tensioners and idlers are in good condition. Address any issues before fitting the new belt.
- How do I confirm the P-355-5M-480 is the correct belt?
- Compare the marking on the old belt with the profile HTD 5M, length 355 mm and pitch 5 mm. If the marking is unclear, measure the old belt and send the drive details with your request.
- What information should I send for a quote?
- Send the part number P-355-5M-480, the marking from the old belt and any drive or sheave details by WhatsApp or email. The team replies promptly.