Timing belt Movendis P-350-H-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Classical Imperial Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-350-H-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-350-H-480 and any equivalents.
The Movendis P-350-H-480 is a classical imperial timing belt in the H profile with a length of 889 mm. When you are replacing a belt on an existing drive, these two values are what you match against the belt in hand. MR Industrial Accessories supplies this belt to maintenance, engineering and purchasing teams.
Start with the marking on the back of the belt you are removing. Confirm that the profile is H and that the length reads 889 mm, then compare that against the P-350-H-480. If the old belt is worn or the marking has rubbed away, measure the length and check the tooth profile against the pulleys before you commit to a part number.
Profile and length are the two identifiers that decide fit here. An H profile belt will not seat correctly on a pulley cut for another profile, and a belt of a different length will not hold the correct tension on a fixed-center drive. Check both figures rather than relying on the part number alone, particularly where a drive has been modified or a belt was previously substituted.
Send us the part number from the old belt and the numbers stamped on it, along with the profile and length you measure. Our team replies by WhatsApp or email and can confirm the P-350-H-480 or point you to the right belt for the drive.
Dimensions
- Profile
- H
- Length
- 889mm
Frequently asked questions
- How do I confirm the P-350-H-480 is the right belt for my drive?
- Read the marking on the back of the belt being replaced. The profile should be H and the length 889 mm. If the marking is unreadable, measure the length and check the tooth profile against the pulleys.
- What information should I send with a quote request?
- Send the part number from the old belt, the profile and length you measure, and any numbers stamped on the belt. Photos of the marking and the pulleys help us confirm the match.
- Can you help if the belt on the drive is not marked?
- Yes. Send the measured length and the pulley details, and our team will confirm whether the Movendis P-350-H-480 fits or suggest the correct belt for that drive.