Timing belt Movendis P-3486-D/14M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-3486-D/14M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-3486-D/14M-180 and any equivalents.
The Movendis P-3486-D/14M-180 is a double-sided timing belt in the Curvilinear Double-Sided Timing Belts series. It measures 3486 mm in length. When you are replacing a belt on a drive, this part number is the starting point for a match.
The most reliable way to identify a replacement is to read the marking on the back of the belt you are removing. If it carries P-3486-D/14M-180, you are looking at the same belt we carry. If the marking is worn or unreadable, note the belt type, the series and the 3486 mm length, then send those details along with the drive information.
Double-sided timing belts are used where the drive needs teeth on both faces, so confirm the old belt is in fact double-sided before matching. Check the belt for cracking, missing teeth, exposed cord or glazing, and inspect the pulleys for wear or debris at the same time. A belt that failed early often points to a drive issue rather than the belt itself.
Send the part number P-3486-D/14M-180 by WhatsApp or email and the team will reply promptly. If you are unsure of the exact number, send the marking from the old belt or the length and series, and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 3486mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Read the marking on the back of the belt being replaced. If it shows P-3486-D/14M-180, it matches this belt. If the marking is unreadable, send the belt type, series and 3486 mm length for confirmation.
- What should I include with my quote request?
- Send the part number P-3486-D/14M-180, or the marking from the old belt along with the length and series. Drive details and photos of the old belt help the team confirm the match.
- Should I replace anything else at the same time?
- Inspect the pulleys for wear, debris or damage while the belt is off, since these conditions affect belt life. Replace the belt if you find cracking, missing teeth, exposed cord or glazing.