Timing belt Movendis P-3360-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-3360-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-3360-5M-480 and any equivalents.
The Movendis P-3360-5M-480 is a curvilinear H-type timing belt with an HTD 5M profile, a 3360 mm length and a 5 mm pitch. When you are replacing a belt, the most reliable match is made by comparing the marking on the old belt with these three values.
Start with the belt you are removing. Read the profile, length and pitch printed on the back, then compare them with the HTD 5M profile, 3360 mm length and 5 mm pitch of the P-3360-5M-480. If the old belt is worn or the marking is unreadable, measure the length along the belt and confirm the tooth profile before ordering.
A timing belt that differs in profile or length will not sit correctly in the pulleys, so match all three values rather than relying on a partial number. If the drive uses more than one belt, inspect the full set and replace where needed so the drive runs evenly.
Send the part number P-3360-5M-480, or the marking from your old belt, by WhatsApp or email. The team can confirm the right belt or suggest an equivalent, and replies promptly with a quote.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 3360mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile, length and pitch on the old belt with the HTD 5M profile, 3360 mm length and 5 mm pitch of the P-3360-5M-480. If the marking is worn, measure the length and check the tooth profile before ordering.
- What should I send to request a quote?
- Send the part number P-3360-5M-480, or the full marking from the belt being replaced, by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.
- Should I replace timing belts in sets?
- If the drive uses more than one belt, inspect the full set and replace where needed so the drive runs evenly. Matching profile and length across the set keeps the drive consistent.