Timing belt Movendis P-297-3M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-297-3M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-297-3M-480 and any equivalents.
The Movendis P-297-3M-480 is a curvilinear H-type timing belt with an HTD 3M profile, a 297 mm length, and a 3 mm pitch. It is used on compact, low-power drives where synchronous motion is required, such as small positioning axes, light-duty conveyors, and miniature spindle or roller drives.
To confirm fit, compare the belt marking on the back of the old belt with the part number P-297-3M-480. Check that the profile reads HTD 3M, the length is 297 mm, and the pitch is 3 mm. Also inspect the pulleys for worn teeth, debris in the grooves, and correct alignment before installing the new belt.
This belt is a direct replacement when the drive uses an HTD 3M profile with a 297 mm length and 3 mm pitch. If the old belt is unmarked or the drive has been modified, send the part number and a photo of the belt and pulleys so we can help confirm the correct item.
For a quote, send the part number P-297-3M-480 by WhatsApp or email. If you need to verify the profile or length, include the belt marking and the pulley tooth count. We carry the Movendis line and can help you match the right belt for your drive.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 297mm
Frequently asked questions
- How do I confirm that the P-297-3M-480 is the right belt for my drive?
- Check the marking on the back of the old belt for HTD 3M, 297 mm length, and 3 mm pitch. If it matches, the P-297-3M-480 is the correct profile and length.
- What should I inspect on the drive before replacing this belt?
- Inspect the pulleys for worn or damaged teeth, clean any debris from the grooves, and verify that the pulleys are aligned. These checks help prevent premature belt wear.
- What information do I need to send for a quote?
- Send the part number P-297-3M-480. If you are unsure of the profile or length, include the belt marking and the pulley tooth count so we can help confirm the correct belt.