Timing belt Movendis P-291-3M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-291-3M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-291-3M-480 and any equivalents.
The Movendis P-291-3M-480 is a curvilinear H-type timing belt with an HTD 3M profile, a 291 mm length, and a 3 mm pitch. Use the marking on your existing belt to confirm these three values before ordering.
Matching a timing belt starts with reading the back of the belt being replaced. Check that the profile reads HTD 3M, the length is 291 mm, and the pitch is 3 mm. If the old belt is worn or the marking is unreadable, measure the length along the pitch line and count the teeth to verify the profile.
This Movendis belt is a curvilinear H-type timing belt. HTD 3M is a common profile for small-pitch synchronous drives, so confirm the tooth shape and pitch match the pulleys before installation. A belt with the wrong profile or pitch will not seat correctly and can damage the drive.
Send us the part number P-291-3M-480, or the profile, length, and pitch from your old belt, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 291mm
Frequently asked questions
- How do I confirm the P-291-3M-480 is the right belt?
- Read the marking on the back of the belt you are replacing. It should show an HTD 3M profile, a 291 mm length, and a 3 mm pitch. If it does, this Movendis belt matches those specifications.
- What if the marking on my old belt is worn off?
- Measure the length along the pitch line and check the tooth profile against the pulleys. The profile should be HTD 3M, the length 291 mm, and the pitch 3 mm. Send those details and we can help confirm the match.
- How do I request a quote for this belt?
- Send the part number P-291-3M-480 by WhatsApp or email. If you are replacing an unmarked belt, include the profile, length, and pitch from your measurements.