Timing belt Movendis P-2840-8M-450

MOVENDIS P-2840-8M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2840-8M-450 and any equivalents.

The Movendis P-2840-8M-450 is a timing belt in the Curvilinear H-Type series, built to the HTD 8M profile with a 2840 mm length and an 8 mm pitch. If you are replacing a belt on a drive that already runs an HTD 8M pulley set, this page gives you the numbers to check before you order.

Matching a timing belt to the one being replaced comes down to the profile, the pitch and the length. This belt is HTD 8M, so the pulley grooves must be HTD 8M as well; an 8 mm pitch belt will not seat correctly in a pulley cut to a different profile. The length is 2840 mm, measured as the belt's own length, so compare it against the marking on the belt you are removing rather than against a measured center distance.

The most reliable check is the back of the old belt. Read the profile and length printed or molded there and set them against the P-2840-8M-450. Where the marking is worn off or the belt is broken, work from the drive instead: confirm the pulley profile and tooth pitch, then confirm the length the drive needs. Send us the part number you are replacing, or the profile, pitch and length you read off the drive, and our team will confirm the right belt or suggest an equivalent.

Timing belts on the same drive should be inspected together. Look for cracked or missing teeth, exposed cord, glazing on the tooth faces, and any uneven wear across the width. On drives carrying more than one belt, replace them as a set so the load stays evenly shared.