Timing belt Movendis P-270-3M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-270-3M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-270-3M-480 and any equivalents.
This Movendis P-270-3M-480 is a curvilinear H-type timing belt with an HTD 3M profile. It has a 270 mm length and a 3 mm pitch. Use these three values to match it to the belt you are replacing.
Start with the belt you are removing. Read the marking on the back: it should show the profile and the length. The replacement must match the HTD 3M profile, the 270 mm length and the 3 mm pitch given here. If the old belt is worn or the marking is gone, measure the length and confirm the tooth profile before ordering.
Check the drive while the belt is off. Look at the pulleys for worn teeth, debris or damage, and confirm the belt runs straight and at the correct tension. A new belt on a worn drive will not last. If you are replacing more than one belt on the same drive, replace them as a set.
To request a quote, send the part number P-270-3M-480 by WhatsApp or email. If you are unsure, send the marking from the old belt and the team will confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 270mm
Frequently asked questions
- How do I confirm the P-270-3M-480 is the right belt?
- Match the profile, length and pitch from the old belt: HTD 3M, 270 mm and 3 mm. If the marking is unreadable, measure the old belt and check the pulley profile.
- Can I replace just one belt on a multi-belt drive?
- If the drive uses more than one belt, replace them as a set so they wear evenly. Check the pulleys and tension at the same time.
- What should I send to get a quote?
- Send the part number P-270-3M-480 by WhatsApp or email. If you are unsure, include the marking from the old belt and the team will help confirm it.