Timing belt Movendis P-2600-D/S8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-2600-D/S8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2600-D/S8M-180 and any equivalents.
The Movendis P-2600-D/S8M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a 2600 mm length. It is the belt to look at when a drive runs two pulleys off opposite faces of the same belt and the replacement has to match on both sides.
Matching starts with the marking on the belt you are removing. Read the part number off the back of the old belt and compare it character for character with P-2600-D/S8M-180. The D in the number tells you this is a double-sided construction, so a single-sided belt of the same length will not fit the drive. Confirm the 2600 mm length and the curvilinear profile against the original before you order.
Double-sided timing belts are used where the belt drives from both the inside and the outside, so both faces carry teeth and both must be in condition. Inspect the pulleys for worn grooves, check the flanges and the tensioner, and look for cracking or missing teeth on either face. If the drive uses more than one belt, replace them as a set so the load stays even.
If the marking is worn off or unreadable, send us the belt part number you have, the profile and the 2600 mm length, and a photo of the belt and the drive. Our team confirms the right belt or suggests an equivalent and replies by WhatsApp or email with a quote.
Dimensions
- Length
- 2600mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the part number from the back of the belt being replaced and match it to P-2600-D/S8M-180. Check that the old belt is double-sided and that its length is 2600 mm. If anything is unclear, send us a photo of the belt and the drive.
- What should I send to get a quote?
- Send the part number P-2600-D/S8M-180, or the marking from your old belt, along with the profile and the 2600 mm length. A photo of the belt and the drive helps us confirm the match.
- Can you help if the old belt has no readable marking?
- Yes. Send the dimensions you can measure, the profile, and photos of the belt and the pulleys. We will confirm the correct belt or suggest an equivalent.