Timing belt Movendis P-2590-14M-430
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-2590-14M-430 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2590-14M-430 and any equivalents.
Matching a timing belt to the one being replaced starts with the marking on the back of the old belt. The Movendis P-2590-14M-430 is a curvilinear H-type timing belt with an HTD 14M profile, a 2590 mm length and a 14 mm pitch. Compare those three values against the belt you are removing before you request a quote.
Read the old belt first. The profile, the length in millimeters and the pitch are the values that identify it, and they are the same values this Movendis belt carries: HTD 14M profile, 2590 mm length, 14 mm pitch. If the marking on the back of the belt is worn or unreadable, measure the length and check the pulley grooves to confirm the profile before ordering.
Send the part number P-2590-14M-430 with the machine or drive reference and the quantity you need. If the belt you are replacing carries a different number, send that number as well so the team can compare the profile, length and pitch and confirm whether this belt matches or suggest an equivalent.
Inspect the drive while the belt is off. Check pulley wear, alignment and tension, and replace belts in sets where the drive uses more than one. A new belt fitted to worn pulleys or a misaligned drive will not run correctly, so correct those conditions before installation.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2590mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Compare the profile, length and pitch on the old belt with the HTD 14M profile, 2590 mm length and 14 mm pitch of the Movendis P-2590-14M-430. If the marking is unreadable, measure the length and check the pulley grooves.
- What should I send to request a quote?
- Send the part number P-2590-14M-430, the quantity, and the machine or drive reference. If the old belt carries a different number, include that as well so the team can compare the values.
- Should I replace more than one belt at a time?
- Where the drive uses more than one belt, replace them in sets. Also check pulley wear, alignment and tension while the belt is off, since those conditions affect how a new belt runs.