Timing belt Movendis P-255-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-255-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-255-5M-480 and any equivalents.
The Movendis P-255-5M-480 is a curvilinear H-type timing belt with an HTD 5M profile and a 255 mm length. The 5 mm pitch matches the HTD 5M tooth geometry. This page covers how to read the old belt marking and what to send when requesting a quote.
Start by reading the marking on the back of the old belt. The part number, profile, and length are usually printed there. For this belt, the marking should show HTD 5M, 255 mm, and 5 mm pitch. If the back is worn or dirty, clean it gently and use good light. A phone photo of the full marking helps confirm the details.
Match the profile and length to the drive. HTD 5M is a curvilinear tooth profile, and the 255 mm length is the datum length. The 5 mm pitch is the distance between tooth centers. Do not substitute a different profile or length without checking the pulley and drive layout. If the old belt marking is unclear, measure the outside circumference and count teeth as a cross-check.
When you request a quote, send the part number P-255-5M-480 and a photo of the old belt marking. If you have the pulley tooth count and drive arrangement, include those details. The team can confirm the belt matches your application or suggest an equivalent. We carry the Movendis line and respond promptly by WhatsApp or email.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 255mm
Frequently asked questions
- What should I look for on the old belt?
- Look for the part number, profile, and length on the back of the belt. For this belt, the marking should include HTD 5M, 255 mm, and 5 mm pitch. A clear photo helps confirm the details.
- How do I confirm the profile and length?
- Check that the old belt is marked HTD 5M and 255 mm. The 5 mm pitch is the distance between tooth centers. If the marking is worn, measure the outside circumference and count teeth as a cross-check.
- What do I send for a quote?
- Send the part number P-255-5M-480 and a photo of the old belt marking. If you have the pulley tooth count and drive arrangement, include those details. The team will confirm the match or suggest an equivalent.