Timing belt Movendis P-2506-S14M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear S-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-2506-S14M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2506-S14M-480 and any equivalents.
The Movendis P-2506-S14M-480 is a curvilinear S-type timing belt with an STD profile and a 2506 mm length. We carry this belt for maintenance, engineering and purchasing teams who need to confirm fit against the drive they are servicing.
Synchronous belts in this family are used where two shafts must stay in step: camshafts and crankshafts on industrial engines, plus the driven shafts on pumps, compressors, blowers and process machinery. The teeth mesh with matching pulleys, so the belt carries the load without slip. On any of these drives, the belt is a wear item, and it is normally replaced before it fails rather than after.
To confirm this belt suits your drive, read the marking on the back of the old belt and compare it with the part number and profile above. Check the pulley tooth profile and the belt width against the pulleys, and measure the length of the old belt in the same way the 2506 mm figure is stated. If the drive runs more than one belt, replace the set together and inspect the pulleys for worn teeth, debris in the grooves and correct alignment before the new belt goes on.
Dimensions
- Profile
- STD
- Length
- 2506mm
Frequently asked questions
- How do I confirm the P-2506-S14M-480 fits my drive?
- Match the part number and the STD profile to the marking on the belt you are removing, then check the pulley tooth profile, belt width and the 2506 mm length against the drive. If any of those do not line up, send us the details and we will help you confirm the right belt.
- What should I send to get a quote?
- Send the part number P-2506-S14M-480 by WhatsApp or email, along with the quantity you need. If you are unsure of the number, send the marking from the old belt or the drive and pulley details, and we will help identify the correct belt or a suitable equivalent.
- Should I replace more than one belt at a time?
- On drives that run multiple belts, replace them as a set so the load stays even across the belts. While the drive is open, inspect the pulleys for worn teeth, debris and misalignment before installing the new belt.