Timing belt Movendis P-2460-5M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-2460-5M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2460-5M-450 and any equivalents.
The Movendis P-2460-5M-450 is a curvilinear H-type timing belt with an HTD 5M profile, a 2460 mm length and a 5 mm pitch. We carry it for maintenance and MRO work where a synchronous belt has to match the drive exactly.
HTD 5M timing belts are used on drives where the belt teeth mesh with matching pulleys to keep the two shafts in step. You will find this construction on equipment such as pumps, fans, blowers, conveyors, mixers, compressors and machine tool spindles, as well as on other industrial machinery that runs a curvilinear tooth profile. If your drive was built around an HTD 5M pulley set, the profile and pitch are the first things to confirm before ordering.
To check fit, read the marking on the back of the old belt and compare it with the profile, length and pitch on this page. The profile must be HTD 5M, the pitch 5 mm, and the length 2460 mm. Also check the belt width against the pulley groove width and look at the pulleys for worn teeth, debris in the grooves or misalignment. A belt that is the right length but the wrong profile will not seat correctly.
When you request a quote, send the part number P-2460-5M-450, the belt marking if it differs, and the width you need. If you are replacing more than one belt on the same drive, list them together so the set can be reviewed as a whole. Our team replies promptly by WhatsApp or email and can help confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 2460mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the old belt and match the profile HTD 5M, the 5 mm pitch and the 2460 mm length. Then verify the belt width against the pulley grooves and inspect the pulleys for wear or misalignment.
- What should I send with my quote request?
- Send the part number P-2460-5M-450, the marking from the old belt, and the width you need. If several belts run on the same drive, include all of them so the set can be reviewed together.
- Where is this type of belt used?
- HTD 5M timing belts are used on synchronous drives such as pumps, fans, blowers, conveyors, mixers, compressors and machine tool spindles, wherever the pulleys are cut for a curvilinear 5M profile.