Timing belt Movendis P-2350-D/5M-180

MOVENDIS P-2350-D/5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2350-D/5M-180 and any equivalents.

The Movendis P-2350-D/5M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series, with a length of 2350 mm. When a drive runs two pulleys on opposite sides of the belt, the replacement must match the original on both profile and length. This page covers how to confirm that match before you request a quote.

Start by reading the marking on the back of the belt you are replacing. The code P-2350-D/5M-180 identifies the series, the double-sided construction and the 2350 mm length. Compare that code against the belt on the drive, and check that the old belt is a double-sided timing belt rather than a single-sided one. A double-sided belt drives from both faces, so a single-sided substitute will not fit the same layout.

Next, confirm the length and profile on the drive itself. Measure the old belt only if the marking is worn away, and check the pulley grooves against the profile. If the drive uses a tensioner or idler, note its position before removal so the new belt can be set to the same running condition. Inspect the pulleys for wear, debris or damaged teeth at the same time, since a worn pulley will shorten the life of any replacement.

For a quote, send the part number P-2350-D/5M-180, the quantity and any details from the old belt marking. If the marking is unreadable, send the length and profile you measured and a photo of the drive. The team can confirm the right belt or suggest an equivalent.