Timing belt Movendis P-2310-D/S14M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-2310-D/S14M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2310-D/S14M-180 and any equivalents.
The Movendis P-2310-D/S14M-180 is a double-sided timing belt in the Curvilinear Double-Sided Timing Belts series, with a length of 2310 mm. It is built for drives that require synchronous power transmission from both faces of the belt. Use this page to confirm the part number and send it to us for a quote.
When matching this belt to the one being replaced, start with the marking on the old belt. Look for the Movendis series name and the part number P-2310-D/S14M-180, then compare the profile and the 2310 mm length. If the old belt is worn or the marking is unreadable, measure the length in millimeters and note the profile from the pulley grooves.
A double-sided timing belt has teeth on both sides, so it can drive two pulleys from opposite faces. Confirm that the replacement belt has the same profile and length as the original, and that the drive is designed for a double-sided belt. Check the pulleys for wear, proper alignment and correct tension before installing a new belt.
Send us the part number P-2310-D/S14M-180, the old belt marking, or the profile and length you measured. Our team will confirm the belt or suggest an equivalent. Quotes are handled by WhatsApp or email.
Dimensions
- Length
- 2310mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt being replaced. The part number P-2310-D/S14M-180, the profile and the 2310 mm length should match. If the marking is worn, measure the length and note the profile from the pulleys.
- What information should I send for a quote?
- Send the part number P-2310-D/S14M-180, or the old belt marking. If that is not readable, provide the profile and the length in millimeters. Photos of the belt and pulleys help us confirm the correct item.
- Can you help if I am not sure of the part number?
- Yes. Send the details you have, including the profile, length and any numbers on the old belt. We will review them and help identify the correct double-sided timing belt for your application.