Timing belt Movendis P-2272-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-2272-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2272-8M-480 and any equivalents.
The Movendis P-2272-8M-480 is a curvilinear H-type timing belt with an HTD 8M profile, a 2272 mm length, and an 8 mm pitch. Use the marking on the back of the belt you are replacing to confirm these three values before you request a quote.
To match this belt to the one being replaced, read the back of the old belt. A curvilinear H-type timing belt in the HTD 8M profile is identified by its profile, its length in millimeters, and its pitch. The P-2272-8M-480 carries a 2272 mm length and an 8 mm pitch. If the old belt shows the same profile and length, this part is the direct match.
When the marking is worn or unreadable, measure the old belt and check the drive. Confirm the profile is HTD 8M and the length is 2272 mm. The 8 mm pitch is fixed by the profile. Send the part number, the profile, and the length to our team by WhatsApp or email, and we will confirm the right belt or suggest an equivalent.
Replacement is also a good time to inspect the drive. Check the pulleys for wear and the belt for cracking or fraying. If the drive uses more than one belt, replace the set together. For a quote, send the part number P-2272-8M-480, or the profile and length from the old belt, and we will reply promptly.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2272mm
Frequently asked questions
- How do I confirm the Movendis P-2272-8M-480 is the right belt?
- Check the marking on the back of the old belt. The profile should be HTD 8M, the length should be 2272 mm, and the pitch should be 8 mm. If those match, this part is the correct replacement.
- What if the old belt marking is unreadable?
- Measure the old belt and check the drive. Confirm the profile is HTD 8M and the length is 2272 mm. Send those details to our team by WhatsApp or email and we will help confirm the right belt or suggest an equivalent.
- What should I send to request a quote?
- Send the part number P-2272-8M-480, or the profile and length from the old belt. Our team will reply promptly with a quote.