Timing belt Movendis P-2224-8M-450

MOVENDIS P-2224-8M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2224-8M-450 and any equivalents.

The Movendis P-2224-8M-450 is a curvilinear H-type timing belt with an HTD 8M profile, a 2224 mm length and an 8 mm pitch. For a maintenance or purchasing professional, those three values are the whole story: the profile fixes the pulley groove form, the pitch fixes the tooth spacing, and the length fixes where the belt sits in the drive.

Start with the profile. HTD 8M is a curvilinear tooth form, so the belt is specified by profile rather than by a classical trapezoidal cross-section. The 8 mm pitch tells you the center distance between adjacent teeth, which must match the sprocket on the drive. A belt with the same length but a different pitch will not seat correctly, no matter how close the outside dimensions look.

The 2224 mm length is the datum that decides whether this belt fits your layout. On a timing drive, length is not a rough dimension; it sets the fixed center distance and the idler take-up. Confirm the length marked on the old belt and the tooth count on the pulleys before you order.

The part number itself is the fastest way to specify the belt. Send P-2224-8M-450 by WhatsApp or email along with the profile and length from your old belt, and we can confirm the match or point you to the right alternative. If the marking on the back of the belt is worn, a photo of the drive and the pulley teeth is often enough for us to work from.