Timing belt Movendis P-2200-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-2200-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2200-D/8M-180 and any equivalents.
The Movendis P-2200-D/8M-180 is a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series. Its 2200 mm length and curvilinear profile define how it fits a drive, so start by confirming both against the belt you are replacing.
The 2200 mm length is the datum to match first. Measure the old belt along its back, or read the length marking if it is still legible, and compare it to the P-2200-D/8M-180. The curvilinear profile is the second check: it must match the pulley grooves on both sides of the drive, since a double-sided belt drives from either face.
Because this belt is double-sided, it is used where two pulleys need to turn in opposite directions from a single belt run. Inspect both faces for cracked ribs, missing teeth, exposed cord, or glazing, and check pulley grooves for wear or debris before fitting a replacement. Any oil or coolant reaching the belt will shorten its life.
If you are unsure whether the P-2200-D/8M-180 is the correct belt, send the part number from the back of the old belt along with the drive details. We carry Movendis belts and can confirm the profile and length against your application.
Dimensions
- Length
- 2200mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 2200 mm length sets the belt's path around the drive, and the curvilinear profile must match the pulley grooves on both faces. Confirm both before ordering.
- How do I check a double-sided timing belt for wear?
- Inspect both sides for cracked ribs, missing teeth, exposed cord, and glazing. Also check pulley grooves for wear or debris, and keep oil and coolant away from the belt.
- What should I send for a quote?
- Send the part number P-2200-D/8M-180, or the marking from your old belt, plus the drive details. We will confirm the profile and length and reply promptly.