Timing belt Movendis P-2160-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-2160-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-2160-3M-450 and any equivalents.
The Movendis P-2160-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile, a 2160 mm length and a 3 mm pitch. When you are replacing a belt, matching those three figures to the belt on the drive is the first check. MR Industrial Accessories supplies this belt to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America.
Start with the marking on the back of the old belt. Read the profile and the length from it and compare them with the HTD 3M profile and 2160 mm length of the P-2160-3M-450. A belt that is the same profile but a different length will not sit correctly on the pulleys, and a different profile will not seat in the grooves.
If the marking is worn off, measure the drive instead. Confirm the tooth profile from the pulley grooves and establish the length the drive requires. The 3 mm pitch of this belt is the distance between tooth centers, so it must agree with the pulleys it runs on.
Send the part number P-2160-3M-450, or the profile and length you read from the old belt, by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 2160mm
Frequently asked questions
- How do I confirm the Movendis P-2160-3M-450 is the belt I need?
- Check the back of the belt being replaced. The profile should read HTD 3M and the length should be 2160 mm. If those match, the P-2160-3M-450 is the same size.
- What if the old belt marking is unreadable?
- Measure the drive. Identify the tooth profile from the pulley grooves and establish the required length. This belt has a 3 mm pitch, which must match the pulleys.
- What should I send for a quote?
- Send the part number P-2160-3M-450, or the profile and length from the old belt, by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.