Timing belt Movendis P-207-3M-370
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-207-3M-370 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-207-3M-370 and any equivalents.
The Movendis P-207-3M-370 is a curvilinear H-type timing belt with an HTD 3M profile and a 207 mm length. It is used in low-power synchronous drives where exact speed and position matter, such as small conveyors, packaging equipment, and compact motion systems. Confirm fit by matching the profile and length on your old belt.
HTD 3M timing belts are common on compact drives that need precise synchronization rather than high torque. Before ordering, check the marking on the back of the old belt and compare it with the profile and length. The P-207-3M-370 has a 3 mm pitch and a 207 mm length, so any replacement must match both.
If the belt marking is worn or unreadable, measure the length along the belt path and verify the tooth profile against a known HTD 3M pulley. Send the part number, a photo of the old belt, and the pulley tooth count to our team by WhatsApp or email. We carry the Movendis P-207-3M-370 and can help confirm it is the right belt for your drive.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 207mm
Frequently asked questions
- What does the Movendis P-207-3M-370 fit?
- It fits drives that use an HTD 3M profile and a 207 mm belt length. Match those two values to the belt you are replacing.
- How do I confirm the part number?
- Read the marking on the back of the old belt. If it matches P-207-3M-370, send that number to our team by WhatsApp or email for a quote.
- Can you help if the old belt marking is unreadable?
- Yes. Send a photo of the belt and the pulley, along with the pulley tooth count, and we will help confirm the correct profile and length.