Timing belt Movendis P-1988-D/14M-180

MOVENDIS P-1988-D/14M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1988-D/14M-180 and any equivalents.

When a timing belt needs replacement, the most reliable starting point is the marking on the back of the old belt. This page covers the Movendis P-1988-D/14M-180, a double-sided timing belt from the Curvilinear Double-Sided Timing Belts series. Use the part number and length below to confirm it matches your drive.

Read the old belt carefully before removing it. The marking on the back gives you the part number, and for this Movendis belt that number is P-1988-D/14M-180. The length is 1988 mm. The belt is a double-sided timing belt, meaning it has teeth on both sides for drives that need to turn two pulleys in opposite directions.

If the marking is worn or unreadable, measure what you can and note the drive arrangement. A double-sided belt is not interchangeable with a single-sided belt, so the profile and the fact that it is double-sided matter. Send us the part number, the length, and a photo of the old belt if possible. We can confirm the Movendis P-1988-D/14M-180 or suggest an equivalent from what we carry.

For maintenance and purchasing, keep the old belt until the new one is on the drive. Check the pulleys for wear and make sure the belt sits correctly. If you are replacing more than one belt on the same drive, it is good practice to replace them as a set. Send the marking from each belt so we can match them.