Timing belt Movendis P-183-3M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-183-3M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-183-3M-450 and any equivalents.
This Movendis P-183-3M-450 is a curvilinear H-type timing belt with an HTD 3M profile and a 183 mm length. It is used in compact, low-power drives where timing and synchronization matter, such as small positioning axes, office equipment, and light-duty conveying. Confirm fit by matching the profile, pitch, and length to your drive before ordering.
The HTD 3M profile is a curvilinear tooth form that engages a matching 3 mm pitch pulley. On this belt, the pitch is 3 mm and the length is 183 mm. These dimensions are the primary fit points: the pulley groove must be HTD 3M, and the belt length must suit the center distance and take-up in your drive. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to cross-check against the part number.
During replacement, inspect the pulleys for worn grooves, debris, or damaged flanges, and check that the shafts and bearings turn freely. Set tension according to your drive manufacturer's procedure, then run the drive and recheck. For drives with more than one belt, replace the full set so the load is shared evenly.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 183mm
Frequently asked questions
- How do I confirm the Movendis P-183-3M-450 fits my drive?
- Match the belt marking to your old belt: HTD 3M profile, 3 mm pitch, and 183 mm length. Also confirm the pulley groove is HTD 3M and that the belt length suits the drive center distance.
- What should I send to request a quote?
- Send the part number P-183-3M-450, the belt marking, and the profile and length from the old belt. If you have a photo of the marking or the drive, include it so we can help confirm the right belt.