Timing belt Movendis P-1820-D/14M-180

MOVENDIS P-1820-D/14M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1820-D/14M-180 and any equivalents.

The Movendis P-1820-D/14M-180 is a curvilinear double-sided timing belt with an 1820 mm length. This page covers what the profile and length tell you when selecting or replacing this belt.

The 1820 mm length is the datum to match first. Measure the existing belt's length and confirm 1820 mm before ordering, because a belt that is even slightly off will not tension correctly or will not fit the drive at all. The double-sided construction means teeth on both faces, so it drives from either side and is used where the belt must turn two pulleys in opposite directions or where a reversing drive is required. The curvilinear profile is intended for smooth engagement and reduced noise compared with trapezoidal profiles.

When you request a quote, send the part number P-1820-D/14M-180 and confirm the length and profile from the belt back or the drive documentation. If the old belt is worn or the marking is unreadable, measure the length and count the teeth if possible, and note the pulley grooves. The MR team can help confirm the right belt or suggest an equivalent based on the profile and length you provide.

Inspect the drive before replacement: check pulley wear, alignment, and tensioner condition. A double-sided belt can mask misalignment because it runs on both faces, so verify that both sides of the drive are clean and true. Replace the belt if you see cracking, missing teeth, or exposed cords. Keep the old belt for reference until the new one is fitted and running correctly.