Timing belt Movendis P-1800-5M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear H-Type Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1800-5M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1800-5M-480 and any equivalents.
The Movendis P-1800-5M-480 is a curvilinear H-type timing belt with an HTD 5M profile, a 5 mm pitch and a length of 1800 mm. The profile and length are the two numbers that determine fit on a synchronous drive, so start there when matching a replacement.
HTD 5M is a curvilinear profile with rounded tooth flanks. It seats in a matching 5M pulley groove and is specified by pitch and length, not by a traditional belt section letter. The P-1800-5M-480 uses a 5 mm pitch and an 1800 mm length, which is the figure to compare against the old belt or the drive drawing.
Timing belts are replaced on length and profile, so confirm both before ordering. Read the marking on the back of the belt, or measure the length along the pitch line and identify the groove form on the pulley. If the drive runs more than one belt, replace the set together so the load stays even across the pulleys.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1800mm
Frequently asked questions
- What do the profile and length mean on the P-1800-5M-480?
- HTD 5M is the tooth profile and 5 mm is the pitch, the distance from one tooth center to the next. The 1800 mm figure is the belt length. Both must match the drive.
- Can you help confirm this belt fits my drive?
- Yes. Send the part number, the marking on the old belt, or the pulley groove and center distance by WhatsApp or email, and we will confirm the profile and length or suggest an equivalent.
- Is this belt replaced on its own or as a set?
- On a single-belt drive it is replaced on its own. On a drive with multiple belts, replace the set at the same time so all belts carry the load evenly.