Timing belt Movendis P-1760-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1760-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1760-D/8M-180 and any equivalents.
The Movendis P-1760-D/8M-180 is a curvilinear double-sided timing belt in the Curvilinear Double-Sided Timing Belts series, with a 1760 mm length. It is the belt to reach for when a drive needs teeth on both faces and the original belt is marked with this number. We carry it for maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. If it shows P-1760-D/8M-180, that is the number to quote. A double-sided belt drives from both faces, so a single-sided belt of the same length will not do the job, and the profile and the 1760 mm length both have to line up with the pulleys before anything is ordered.
When the marking is worn off or the belt failed before anyone recorded it, send us what you can read from the drive: the part number if any digits survive, the belt profile and the 1760 mm length, and photos of the pulleys and the routing. Our team replies promptly by WhatsApp or email, confirms the right belt, and can suggest an equivalent where one applies.
Replacing a timing belt is also the point to inspect the drive. Check the pulleys for worn teeth, the flanges for damage, and the tensioner and idler for play or roughness. On a double-sided drive, both faces of the belt carry load, so a worn pulley on either side will shorten the life of the new belt.
Dimensions
- Length
- 1760mm
Frequently asked questions
- How do I confirm this is the right belt?
- Read the marking on the back of the belt you are replacing. If it reads P-1760-D/8M-180, quote that number to us and we will confirm the Movendis curvilinear double-sided timing belt.
- What should I send if the old belt number is unreadable?
- Send the belt profile and the 1760 mm length if you can measure them, plus photos of the pulleys, the tensioner and the belt routing. We reply promptly by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
- What should be checked while the belt is off?
- Inspect both rows of pulley teeth, the flanges, and the tensioner and idler bearings. Because a double-sided belt drives from both faces, wear on either side of the drive affects how the new belt runs.