Timing belt Movendis P-1696-D/8M-180

MOVENDIS P-1696-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1696-D/8M-180 and any equivalents.

The Movendis P-1696-D/8M-180 is a double-sided timing belt with a 1696 mm length. This page covers how to confirm it matches the belt you are replacing before you request a quote.

Matching starts with the marking on the old belt. Read the part number and length directly from the back of the belt, then compare them against the P-1696-D/8M-180. A double-sided timing belt drives from both faces, so the tooth profile on each side matters as much as the length. If the old belt is worn, frayed or unreadable, measure the length and note the profile.

Confirm the drive layout as well. Count the pulleys, check that both faces of the belt are toothed, and verify the belt runs true through the guide flanges. A belt that is too long or too short will not tension correctly, and a single-sided belt cannot substitute where both faces must engage teeth. The 1696 mm length and double-sided construction of the P-1696-D/8M-180 are the two figures to check first.

When you contact us, send the part number P-1696-D/8M-180, the machine or drive it fits, and a photo of the old belt marking if it is still legible. We carry Movendis belts and can help confirm this is the correct belt or suggest an equivalent.