Timing belt Movendis P-1608-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Curvilinear Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-1608-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-1608-D/8M-180 and any equivalents.
This Movendis double-sided timing belt is identified by part number P-1608-D/8M-180 and a 1608 mm length. Double-sided timing belts are used in drives that need synchronized power from both sides of the belt. Use the profile and length to confirm fit before ordering.
Double-sided timing belts are common on reversing drives, twin-shaft arrangements, and other applications where two pulleys must turn in opposite directions from a single belt. The teeth on both sides maintain timing without slippage. This belt is part of the Movendis Curvilinear Double-Sided Timing Belts series.
To confirm this belt fits your drive, compare the existing belt's profile and its 1608 mm length against the data here. Check that the belt is a double-sided timing type and that the part number on the back of the old belt matches P-1608-D/8M-180. If the marking is worn or unreadable, measure the length and note the tooth profile.
When you request a quote, send the part number P-1608-D/8M-180, the profile, and the 1608 mm length. If you are replacing a belt on a drive with two or more belts, plan to replace them as a set. For confirmation or an equivalent suggestion, contact MR Industrial Accessories by WhatsApp or email.
Dimensions
- Length
- 1608mm
Frequently asked questions
- What does the part number P-1608-D/8M-180 tell me?
- The part number identifies this as a Movendis double-sided timing belt with a 1608 mm length. The profile is curvilinear. Use the part number along with the profile and length to confirm the correct belt for your drive.
- How can I confirm this belt will fit my equipment?
- Check the old belt's marking for P-1608-D/8M-180 or compare the profile and 1608 mm length. If the marking is not clear, measure the belt length and note the tooth profile. Send those details with your quote request.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts on the same drive at the same time. Mixed wear can affect timing and load sharing. If you are unsure, include the number of belts on the drive in your quote request.